Appears when the instrument is overheated. The Loop test and RCD functions are inhibited when the instrument is overheated. Fluke does not warrant that software will be error free or operate without interruption.
The UK Loop and RCD tests are inhibited if the. Specifications are subject to change without notice. All product names are trademarks of their respective companies.
Return the tester to a Fluke Service Center. Wait while the tester cools down. Likely needs the firmware sorted or new circuit board. Fault Voltage - normally no earth.
Error Condition Codes Self-Test Fails 1. Excessive Noise - excessive interference on line. Upon testing earth loop on a lighting circuit today, err appeared on the screen. According to the manual this indicates a fault voltage.
Fluke authorized reseller, and does not apply to fuses, disposable batteries, or to any product which, in.
V, as specified by local electrical codes. Check the installation, in particular, the . Secondary display shows additional code:. Did an earth loop test on a water heater today in an office block at the factory where I work. Had alot of trouble with my fluke tester. Also found tester very slow on loop readings, if you slip off the terminal when testing you also get that reading.
Image is for illustrative purposes only. Please refer to product description. Manufacturer: FLUKE FLUKE. Prospective Earth Fault Current (PEFC) or Prospective Short Circuit Current (PSC) determined by dividing.
Multifunction Installation Testers. The installation testing solution for demanding environments. Einwegbatterien oder andere Produkte, die nach dem Ermessen von Fluke unsachgemäß verwendet, verändert.
Ingen kommentarer:
Send en kommentar
Bemærk! Kun medlemmer af denne blog kan sende kommentarer.