Molex 6 pin

Find great deals on eBay for Molex Connector Pin in Electrical Connectors. Pin and Socket Power Connectors. Molex EXTreme EnergetiC High-Current Connector . Once you know, you Newegg!

Molex Pin Specialized Cables are available at Mouser Electronics.

This Dynamode 10cm 4-Pin Molex to - Pin PCle Cable will power a PCI-Express expansion card. The cable is necessary if your power supply unit (PSU) does not have a PCI-Express port but has two 4-pin pe. This power adapter cable is used in conjunction with PCI Express graphics cards. It allows two standard pin molex plugs to connect into the pin power socket on a PCI-E graphics card.

Please check your Graphics Card Power Connector to ensure it matches our Pin Connector. We have included a Large Picture in the . RqGoF I have seen a ton of posts showing the dangers of using sata to pcie so I stayed away, but I figured since molex to pin. Molex connectors are a great way to connect sensors and other items that need to be removable to a circuit board.

This connector system uses a board mount header with a 0. The pins lock inside the housing and the . Buy Molex to Pin Cable online at Lazada Philippines. X MOLEX TO PIN VGA POWER CABLE -10CM. But should I use this connector, or the 6pin that comes with the power supply?

I was running short on pin molex plugs on my PSU. Going through my box of cables I came across a single pin molex to pin PCI-E connector. Just what I needed to get around my shortage. So I did some math pin Molex is rated for 60W, compared to 75W for PCI-E.

Motherboards supply up 75W. Manufacturer, Molex , LLC. Number of Positions Loade All. Shop with confidence on eBay!

So I have some proprietary PCIe xadd-in cards for communicating with a microscope. They require auxiliary power through a female 4-pin molex receptacle on the card. My PSU only has two spare - pin cables.

I have some adapters for molex to - pin , that is, two female molex and making . I dont like using a adapter for a pci-e to 8. I wouldnt use a molex personally. Depending on what molex you use, how the 12v rails are setup, you could overload one and either shut the pc down or fry the psu which might be a butthead and take some other parts with it. I think he means 4- pin molex to - pin.