Pir sensor installation guide

Refer mounting instructions ). All PDL Passive Infrared ( PIR ) automatic movement sensors are an electronic. When movement of a heat source ( i.e. person, dog or car) across two PIR zones is detected by the sensor , it automatically . PIR Motion Sensor -Transmitter. United States and other countries.

Find a selection of motion sensor including Motion Sensor Light, Motion.

W Low Energy Floodlight with PIR. Please retain for future. Do not attempt to modify the light or PIR sensor unit, there are no user . Features and Connections. Ceiling PIR Detector (311). The instructions with every PDL sensor should always be followed.

Local Wiring Regulations and Codes of Practice should be followed for installing PDL sensors. We recommend that the advice of a registered electrician be sought before any installation work commences.

PDL Industries Lt its employees and distributors,. Select the Mounting Location. Allow a clear line-of-sight to all areas to . If you require information or assistance regarding the installation , configuration, or operation of the PIR. Occupancy Sensor , contact Technical Services at Diginet Control Systems. Product summary and capabilities.

It includes instructions for using and managing the product on your network. Video and audio surveillance can be regulated by laws that . Check the laws in your local region before using this product for surveillance purposes. IPRated suitable for restricted internal applications. Multiple PIR Sensor Switching: A maximum of SLFM360L PIR sensors can be wired in parallel, to enable any detector to turn ON all the lights connected. The total load must not exceed the lamp rating of a single SLFM360L unit.

First make sure your PIR sensor is wired to your board as shown in the previous page. You must connect the power, groun and sensor output to your board. INSTALLATION INSTRUCTIONS.

Fresnel lens made for 360° detection in . The Bravo 5GB uses a special.

Your PIR Detector has a number of detection zones at various horizontal and vertical angles, as shown. A moving human body crossing or entering one of the zones activates the Detector. Mount the Detector at a height of 2. The LC-100PI detector uses a special designed optical Lens with unique Quad (Four element) PIR Sensor and new ASIC based electronics optimized to eliminate false alarms, caused by small animals and Pets. Stefano Orlati Transformer. MOTION SENSOR BOX CONTENTS.

Motion Sensor Switch with Controller Box. Installation Instructions. Place Attachment Base on ceiling by using both screws and adhesive. Insert the two AA batteries noting the proper orientation. Lock the Motion Sensor by twisting onto the base.

Use PIR sensors in spaces where there are fixtures or furniture that obstruct a clear line of sight.