Master slave hdd

You might see or hear references to master and slave drives in your computer and wonder what they are. In terms of their status, the master drive is the. Anything that you store on a secondary hard drive remains unaffected in the event that your primary Windows drive becomes unbootable or fails.

As long as you have a Windows drive installed . The 4gb Hard drive has nothing.

In one of my Hard drive , boot sector went bad. So I will not be able to boot boot into my computer using that hard drive. I bought another SATA hard drive.

I want to know how to make my old hard drive as slave and my new hard drive as master. Why would you set one hard drive as master and the other as slave ? Is the hard drive a master by default? To allow for two drives on the same cable, IDE uses a special configuration called master and slave.

Install IDE Hard Drive - A guide to installing IDE hard drive - This guide will take you through the process of how to install hard drive master slave , how to install an IDE hard drive jumper settings, how to connect IDE hard drive to motherboar and everything you need to know about installing an IDE hard drive.

In some systems a master is selected from a group of eligible devices, with the other devices acting in the role of slaves. They have the advantage of often having their jumpers much more clearly labeled than their hard disk counterparts. Most optical drives, for example, have three jumper blocks at the back, labeled MA ( master ), SL ( slave ) or CS ( cable select).

If you are using two drives on a channel, it is important to ensure that they are . This article is for informational purposes only and no longer being updated by Seagate. This does not apply to Serial ATA drives (SATA). ATA drives are configured at the factory for a cable select setting and is the.

SATA drives have one cable per drive. I recently installed a ssd instead of my hdd drive and installed a caddy instead of my dvd-drive and put my hdd inside there. My primary concern is whether Fedora will be ok with this after I get it back up.

If your existing hard drive is configured as “ Master ”, then set your new hard drive to “ Slave ”. WinHIIP would i need to change the settings from master to slave ? It allows the drive to assume its position in your IDE port assignment from its position on the data cable. Either drive can be master. Some drives will tell you how to set it on the drive, others, just do a web search for the company name and jumper setting.

If both drives have systems, it will go to the one selected in the system preferences. If neither drive has been s.

I have seen old IDE drives misbehave with jumper settings that should work. Configuring your Hard Disk Drive ( Master , Slave , or Cable Select) - Setting the Jumper. If this is the only HDD in your computer, set the pin setting to Master.

Adding hard drive from old computer to new computer to transfer files to new computer hard drive. The related computer primary slave or master hard drive errors often occur to people due to many reasons, like incorrectly master or slave hard drive order setting, loose or incorrect hard drive connection or corrupted hard drive issues, etc. An under your circumstances, it could be caused by the incorrect hard drive settings . For some uncanny reason, when I entered the BIOS to auto detect the new hard drive , the drive only detects under Primary Slave drive, despite the jumpers being set to Master and the drive being plugegd into the end (black) connecotr on the secone IDE cable. I believe the IDE-cable is configured as .