Lock out tag out procedures template

Employees authorized to perform lockout shall be certain as to which switch, valve, or other energy isolating devices apply to the equipment being locked out. More than one energy source (electrical, mechanical, or others) may be involved. Any questionable identification of sources shall be cleared by the employees with. The following sample lockout procedure contains the minimum information necessary to help you develop a energy control procedure that meets the requirements of. You can use this fill-in-the-blank template , or develop your own form.

When re-energizing equipment is necessary — when power is needed to test or position the equipment, for example — temporary removal of lockout or tagout devices is allowed.

This LOTO Procedure requires a specific sequence. LOTO Authorized Person: I agree that the scope of work described in Section falls within the LOTO Safe Zone established by the electrical electrical electrical electrical isolations in Section 2. In general, new written lockout tagout procedures need to be developed for each type of machine or equipment. Otherwise, a tagout system must be used. This program does not apply to cord and plug connected equipment . This form is made to print and fill out by hand for those not comfortable filling it out on the computer. Download forms from the website and print.

Or download the forms, save and then print. Fill in the blanks and tables with appropriate information.

This procedure establishes the minimum requirements for the lockout or tagout of energy isolating devices. Note Specific Procedures for control of hazardous energy sources must be developed for any equipment or machinery before any maintenance or servicing is performed on it. These are identified by yellow highlighte red text in the template. Example : Company Name. The program establishes minimum requirements for lockout and tagout of energy- isolating . If developed by an authorized employee, their supervisor must approve the procedure.

This supplemental procedure is applicable when more than one . In accordance with SPS 3and OSHA 29. Control of Hazardous Energy. Note: This document provides.

All other employees are responsible for ensuring they do not . An authorized employee is defined as a person who locks out or tags out machines or equipment in order to perform servicing or maintenance on that machine or equipment. The steps necessary to isolate equipment are often documented in an isolation procedure or a lockout tagout procedure. Lockout: follow this step template.