Mcp41010

The wiper position varies linearly and is controlled via the SPI interface. Providing Analog Output Control. It is fully adjustable using 2steps from approximately zero to 10K ohms (or about ohms per step ). Check stock and pricing, view product specifications, and order online.

V source on the Raspberry Pi GPIO pins.

Potentiometer values for 10kΩ, 50kΩ and 100kΩ. Single and dual versions. SPI serial interface (mode and 1). Low power CMOS technology. A maximum supply current in static operation.

Multiple devices can be daisy-chained together. The MCP42XXX contains two independent channels in a 14-pin PDIP, SOIC or TSSOP package. This device comes in tube packaging.

The devices consume 1 . Although I managed to design hardware connections, I lack the basic sketch commands to set the resistor value to test it. Any help would be appreciated. Digital potentiometer with SPI Interface. Using this pot with an Arduino is a doddle using the following library (wiring instructions included): github.

Once you have the SPI lines connected and can command the potentiometer with the library, you . Program 21-exercises the potentiometer by running it through all possible 2states. Explore Integrated Circuits (ICs) on Octopart: the fastest source for datasheets, pricing, specs and availability. But when I read it back what I just enter to the pot,. Müşteri Stok Kodunuz, Yükleniyor. Siparişin toplam kalem sayısına göre bir sonraki gün sevkiyat hakkı saklıdır.

It consumes 1µA during static operation. A software shutdown feature is provided that disconnects the A terminal from the resistor stack and . V Power Supply Module, KY-0Heart Bea. Description the mcp41xxx and mcp42xxx devices are 256-position, digital potentiometers available in kω, 50kω and 1kω resistance versions.

Themcp41xxx is a single-channel device and is offered inan 8-pin pdip or soic package.

The mcp42xxx con-tains two independent channels in a 14-pin pdip, soicor tssop . Cs RCSck RCSDI RCThanks. You do not have the required .